can u show us how ... By: Rob4201000. on 14 Sep 11, 16:27:53 can u show us how to replace a carroded freeze plug on a? 4age and allso what size we would need.
In this video I show you how to port polish an intake manifold. Remember to wear your safety gear and take your time. The intake itself took roughly 2 hours to polish. Removal of the head is recommended before any grinding or polishing to ensure none of the filings make it into the cylinder bore and cause damage to the cylinder walls.
fuel atomization is ... By: twincam16seca. on 23 May 12, 04:13:27 fuel atomization is the? injectors job, not the job of casting dags, if the fuel isn't atomizing properly you should look into getting new injector!
thanx!!! really ... By: alexaoo. on 21 May 12, 05:49:01 thanx!!! really helped!!? :D
Unless you have? ... By: Pudgy138M. on 10 May 12, 15:40:29 Unless you have? fuel injection
Good video. I'm ... By: Rleo6965. on 03 May 12, 01:36:31 Good video. I'm just about to revive or rebuild my old 4G13 engine in replaced with 4G15 engine for fuel economy reason. It's good to learn that port polishing will also help on fuel economy.
Just a question. What do you mean on "whirl polish in the combustion chamber"?
Did you mean also polish? the concave portion under the cylinder head which where intake valve , exhaust valve and spark plug hole located. Of course avoid touching the valve seat.
Thank you very much for sharing.
thanx 4 the? video ... By: evilmuscle. on 25 Apr 12, 19:25:40 thanx 4 the? video man
Great video!! I ... By: gates403. on 19 Apr 12, 22:01:09 Great video!! I just got a brand new eldelbrock RPM airgap. Never attempted this but I think I can do this. So just gently run the tool back and forth? using each grit until smooth? Dumb question I know.
you need to? do a ... By: 8sixfeetunder. on 15 Apr 12, 01:34:15 you need to? do a video on your ford f100
no i totly ... By: curtknows101. on 23 Mar 12, 13:56:05 no i totly dasagree with that? statmint, i aent thu dummest, im rite your wrong, im big your little, im smot your not, so ha i win!!!!!
Good video man. ... By: timzy0. on 23 Mar 12, 11:03:54 Good video man. are? you a teacher you dont say um or arrrr very well spoken. And I look identical to you hair facial hair everything your just a bit older though.
you could be the ... By: UCANTCATCHTHEBANDIT. on 22 Mar 12, 02:58:08 you could be the dumbest? person alive, though I have no trophy for you take solice in that statement. read a couple comments above to understand the difference between motors and engines. p.s. your life is worthless
How much HP gain ... By: enticed2zeitgeist. on 21 Mar 12, 07:08:44 How much HP gain would? you say this process gives? like 5hp?
nice little 67-72 ... By: killertctma. on 21 Mar 12, 04:43:51 nice little 67-72 ford there. i have a 68 and 71. 68 just became a parts truck about? 2 weeks ago though sadly.
Good video, even if ... By: Johny40Se7en. on 19 Mar 12, 21:12:30 Good video, even if the performance gains are barely noticeable they look so nice and shiny =P
And it's? always good to know that the flow is better. Just one thing though, how would you increase power at the lower RPM just using basic things?
220? gwit wheel lol ... By: metalgtp. on 18 Mar 12, 05:27:40 220? gwit wheel lol! awesome job though!
I'm sorry it? has ... By: Commrcldiver. on 17 Mar 12, 17:36:32 I'm sorry it? has taken so long to reply. I suggest reading some of the other comments refrencing fuel atomization.
No but it would ... By: Commrcldiver. on 17 Mar 12, 17:32:37 No but it would seem fairly easy? to accomplish that. I never thought of that but it makes a lot of sense. You might be on to something there!
Thats? a great idea! By: Commrcldiver. on 17 Mar 12, 17:30:59 Thats? a great idea!
Bad. Some ... By: Commrcldiver. on 17 Mar 12, 17:30:40 Bad. Some roughness? is desired to promote fuel atomization.
To reduce flow ... By: Commrcldiver. on 17 Mar 12, 17:28:37 To reduce flow restriction upon entry to the head. Some roughness is desired to promote? fuel atomazation.
@commrcldiver ,kool ... By: singlecam1000. on 17 Mar 12, 17:23:06 @commrcldiver ,kool I appreciate the? help
1/8" if? I remember ... By: Commrcldiver. on 17 Mar 12, 17:21:15 1/8" if? I remember correctly.
It was a? Corolla By: Commrcldiver. on 17 Mar 12, 17:20:45 It was a? Corolla
lol no. I? dont ... By: Commrcldiver. on 17 Mar 12, 17:20:03 lol no. I? dont really see what you are refering to.
Also I did not stop ... By: Commrcldiver. on 17 Mar 12, 17:15:57 Also I did not stop with the intake. I also did the port job on the head and the swirl polish in the combustion chamber. Along with other tricks and mods that? were preformed while the engine was out of the car I did as a matter of a fact see some pretty good gains.
Umm... in this video I show you uhhh... how to uhh... hand polish aluminum lol. This is part 2 of 2. The entire process took roughly 4 and a half hours and I watched movies for most of them. Forgive the speech impediment lol.
Sweet! I'm going to ... By: MrOutlawCat. on 18 May 12, 05:25:01 Sweet! I'm going to do? this to my Explorer's Covers.
Just goes to show ... By: RetroRepair. on 10 May 12, 19:40:40 Just goes to show what a bit of old fashioned elbow grease can achieve. Very? good job and thanks for the tips!
This? is an awesome ... By: thehouserocker. on 30 Apr 12, 00:37:41 This? is an awesome demonstration! I stripped the paint off my aluminum bicycle and I'll be using this method to polish it, I can't wait!
This is great man. ... By: Iosis6. on 19 Apr 12, 05:09:10 This is great man. I think I will? try this on my old dirty ones instead of buying new after market ones.
i do circular ... By: azonicrider32. on 11 Apr 12, 21:56:28 i do circular motions with 400 grit, then 800, then? 1000. after that i clean the part and start doing directional polishing with 2000 grit(straight motions in the longest direction of the part, then i clean the part and doit again with 2500 grit and constant water supply streaming over the part. when thats done i clean with alcohol and use a heafty amount of mothers polishing wax,. a mirror finish every time.
I want to restore ... By: icearnett. on 02 Apr 12, 04:28:54 I want to restore my sailboat mast. it is slightly pitted and has oxidization all? over it. You have the best DIY video for restoring aluminum parts on you tube.
bravo...? By: icearnett. on 02 Apr 12, 04:26:57 bravo...?
Nice job,? you ... By: Occamed. on 21 Mar 12, 18:43:04 Nice job,? you started on the inside surface yet?
4AGZE valve cover?? By: viciousroadietom. on 20 Mar 12, 01:12:20 4AGZE valve cover??
That really depends ... By: Commrcldiver. on 17 Mar 12, 17:45:03 That really depends on how you treat it and how well you maintain? it.
Harbor Freight ... By: Commrcldiver. on 17 Mar 12, 17:43:55 Harbor Freight Tools? for about $20.00
awsome tip with? ... By: randoriremix. on 16 Mar 12, 13:21:59 awsome tip with? the soapy water
hehe i? was 1st ... By: hopcup1. on 27 Feb 12, 21:06:01 hehe i? was 1st like wtf is this guy doin.. but wow im impressed looks sweet
Great tutorial I'm ... By: My4elements. on 25 Feb 12, 08:16:31 Great tutorial I'm ging to tri it out. Like fupabox says soek The wetsand paper for 5 min before using? it will even improve your already great result. Nice Job.
Awsome tut , would ... By: Chronicxable. on 30 Jan 12, 04:13:34 Awsome tut , would of looked even sicker if u? painted the wording in black , but awsome anyway
Hey were did u get ... By: MegaFamous143. on 03 Jan 12, 07:04:04 Hey were did u get the sand? blaster:)
Nice good? ! By: adonisarnold. on 22 Dec 11, 00:55:49 Nice good? !
great advice and a ... By: ACoustaDC. on 01 Dec 11, 01:07:24 great advice and a great set of vids, thank you for the info. I? feel brave enough to give it a try myself!
Well done, very? ... By: Elwoodyoo. on 27 Nov 11, 15:21:30 Well done, very? useful!
Fantastic job mate! ... By: stuartsmithify. on 06 Nov 11, 15:30:23 Fantastic job mate!! I am going to give this a shot on my VFR 400 NC30 frame and swingarm.?
great? vid! By: alexodeascooter. on 06 Nov 11, 08:18:01 great? vid!
Great Vid, Great ... By: 7Storm7. on 04 Nov 11, 03:31:20 Great Vid, Great work!!!!?
How? long does this ... By: thebicyclemasters. on 29 Oct 11, 08:10:06 How? long does this shine usually last??
I? HAVE THAT DELL By: RelentlessIntentions. on 26 Oct 11, 00:10:14 I? HAVE THAT DELL
Great work man, Did ... By: TheflickerofMotion. on 17 Oct 11, 23:10:31 Great work man, Did you ever try T cut polish, if not you should it works just as good as any alloy polish and quicker too, just wip some on and leave to dry and then? 2 or 3 mins later polish off. try some time. cheers for uploading
.
Umm... in this video I show you uhhh... how to uhh... hand polish aluminum lol. This is part 1 of 2. The entire process took roughly 4 and a half hours and I watched movies for most of them. Forgive the speech impediment lol.
because he's ... By: abstainedevelopment. on 17 May 12, 22:32:41 because he's showing you how ?
What speech ... By: legendaryfitness. on 01 May 12, 17:55:01 What speech impediment? I? was waiting for it and....nothing!!
Great walk? through ... By: dennoose. on 01 May 12, 01:30:54 Great walk? through thanks alot for the effort recording it for the rest of us
im glad somebody ... By: 7vgitz. on 29 Apr 12, 03:36:39 im glad somebody was amused by my dorky comment. ? lol.
nice ford f100 in ... By: 8sixfeetunder. on 15 Apr 12, 01:18:11 nice ford f100 in the background. i? have one
Lmao, thats? a ... By: ECGxSMASHEY. on 12 Apr 12, 02:44:05 Lmao, thats? a brushed stainless steel fridge and was most likely made that way. That totally explains why i had initally thought he was in his kitchen, hahaha.
how? long did it ... By: 7vgitz. on 02 Apr 12, 12:43:46 how? long did it take you to do your fridge?!?!
That valve cover ... By: MrJordanHenley. on 28 Mar 12, 00:41:50 That valve cover looked incredible!?
Thats a pretty good ... By: Commrcldiver. on 17 Mar 12, 17:41:29 Thats a pretty good tip. I'm going to try? that next time.
Mothers? is great ... By: Commrcldiver. on 17 Mar 12, 17:40:11 Mothers? is great stuff!
go the MR2 engine ... By: randoriremix. on 16 Mar 12, 13:09:13 go the MR2 engine still miss? that car:(
Every time i polish ... By: 02tnewton. on 09 Mar 12, 20:34:23 Every time i polish metal, it goes rusty in like a month...? any advice to prevent this?
Thanks? men By: MegaTuputamadre. on 03 Mar 12, 04:58:07 Thanks? men
heybuddy awesome ... By: blackcummins00. on 24 Feb 12, 16:24:05 heybuddy awesome vid, ive tried a bumch of stuff and so far for polishing wheels chrome stainless diamond plate ive used everything and the best of the best is '' BLUE MAGIC METAL POLISH CREAM'''cost 6 bucks and goes along ways its in a short round plastic can with a blue? lid and its a cream that stuff works the best second best but just as good as good as the first i found out and is much faster and easier ''''DIAMOND BRITE TRUCK BOX POLISH'''' cost $10bucks
y dont you just ... By: bozillakilla. on 04 Feb 12, 17:55:37 y dont you just sand it and use? mothers polish?
Id let him work? on ... By: Ravensheart2000. on 01 Feb 12, 18:26:51 Id let him work? on my cars.
do you? have that ... By: nixonpunk222. on 29 Jan 12, 09:15:33 do you? have that 4agze in a AE86?
poolis cylinder ... By: GodfatherMaxi. on 02 Dec 11, 17:55:57 poolis cylinder engine if you think breaks? when heated?
i tried that shit ... By: shitrealovahea2. on 24 Sep 11, 02:16:20 i tried that shit same results,less money n time ,same results s? o s pads with dish liquid,then i put that aluminum polish on that shit,same results
lol he said
? 2 ... By: 84chrishi. on 20 Sep 11, 23:41:03 lol he said
? 2 buck at the dollar store lmao
Not? bad. I just ... By: interceptereater. on 20 Sep 11, 03:42:17 Not? bad. I just setup this: enginepolishingdiy.blogspot.com
'Paper towels are ... By: luke179gy. on 20 Sep 11, 03:08:07 'Paper towels are your friend'? HAHAHA
do it and? let us ... By: KyleMakYeah. on 17 Sep 11, 07:55:35 do it and? let us know how bad that goes
![\"How To\": How To](http://i.ytimg.com/vi/93JbeCLnK2k/2.jpg "\\"How To\\": How To")
![\"How To\" Port polish an intake manifold](http://i.ytimg.com/vi/NMoBx5Y0Ock/2.jpg "\\"How To\\" Port polish an intake manifold")
![\"How To\" polish aluminum by hand (part 2)](http://i.ytimg.com/vi/srjvR8Z82CU/2.jpg "\\"How To\\" polish aluminum by hand (part 2)")
![\"How To\" polish aluminum by hand (part 1)](http://i.ytimg.com/vi/YrFmA2ROSYo/2.jpg "\\"How To\\" polish aluminum by hand (part 1)")
Latest comments made on this video:
By: Rob4201000. on 14 Sep 11, 16:27:53
can u show us how to replace a carroded freeze plug on a? 4age and allso what size we would need.